McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 103 / 276

4
Configuring iSAN Connections
4-25
Example Configurations and Procedures
• If the WAN link is severed, separate mSNS servers allow
continued undisturbed communication between initiators and
targets within the local and remote sites.
• When the WAN link is reconnected, communication between the
local and remote devices is automatic and no fabric resets are
necessary to reconverge the network.
A simplified version of this is illustrated in Figure 4-11 on page 4-25.
Figure 4-11
Automatic Communication
To configure this example, follow these steps.
Configuring Ports and Connections
1. Log in into Element Manager for the mSAN with management
port address 192.168.12.131.
NOTE:
You can log in through SANvergence Manager or by entering the IP
address into an internet browser.