McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 129 / 276

5
Configuring iSCSI Connections
5-21
Zoning iSCSI Devices
Setting Up a LUN Map and Mask
1. In the
mSAN Configuration
window, click
New Zone
to display the
New Zone
dialog box.
2. In the
New Zone
dialog box, type a zone name.
3. Select the newly-created zone and the FC Target with multiple
LUNs that you want the iSCSI Initiator to access, and click
Add
.
The zone configuration at this point is shown in the Figure 5-9 .
Figure 5-9 mSAN Configuration Window
4. Right-click the FC target in the Router Zones section and launch
the
LUN Mapping/Masking
dialog box ( Figure 5-10 on page 5-22).
By default, all LUNs are selected (visible).
5. Select the LUNs that you want to provide access to the initiator.
Set a selected LUN to a VLUN value of zero. You can change the
VLUN value of other selected LUNs, but must ensure that one of
the selected LUNs have VLUN set to zero. Click OK.