McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 111 / 276

5
Configuring iSCSI Connections
5-3
Introduction
Figure 5-2
Example Configuration
The server in Figure 5-2 can either be directly connected to the SAN
Router or indirectly connected via an intermediate IP network. For a
direct-attached configuration, the server must be physically
connected to the iSCSI-capable ports (13-16) on the SAN Router.
When connected via an intermediate IP network, the server must
have IP connectivity to one of the TCP ports on the SAN Router.
In the example configuration, the iSCSI server needs access to an FC
disk that is directly connected to one of the FC ports on the SAN
Router.