5
Configuring iSCSI Connections
5-13
Configuring iSCSI Devices
Configuring iSCSI Devices
There are two ways to configure a SAN Router with a list of iSCSI
devices (access control list) allowed to connect - Automatic Addition
and Manual Configuration.
To configure devices, select
Configuration
>
iSCSI
>
Devices
. The
iSCSI
Devices
dialog box appears (
Figure 5-7
on page 5-15).
Figure 5-6
iSCSI Devices Dialog Box
Adding iSCSI Devices Automatically
A convenient way to configure the access control list (iSCSI initiators
only) is to allow the SAN Router to add any iSCSI initiator that
attempts to log in. Each newly discovered device appears in the
iSCSI
Devices
dialog box (
Figure 5-6
on page 5-13 and
Figure 5-7
on
page 5-15) without manual configuration.
To enable automatic configuration of the access control list, select the
Enable
Auto Initiator Accept
checkbox in the
iSCSI Devices
dialog box.
In addition, you can enable each iSCSI device registered with the
SAN Router by clicking the checkbox in the
Enable
column for the
device.
Summary of Contents for Eclipse 2640 SAN
