McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 193 / 276

7
Configuration, Firmware, and System Log Maintenance
7-7
Resetting the System
•
Reset SAN Router
- This resets the hardware and firmware while
maintaining the existing configuration values. Be sure to select
this option if you want to maintain any values you have set
through configuration dialog boxes.
•
Reset to Factory defaults
- This resets the hardware and firmware
and changes configuration values to the factory-defaults. Refer to
Factory Default Settings for the SAN Router
on page 7-8 for a list of
these default settings. Make sure that no conflicts will occur by
resetting to these defaults.
For a list of default settings for SANvergence Manager
parameters, refer to Chapter 1 in the
SANvergence Manager User
Manual
.
NOTE:
Both of these Reset options disrupt port operations.