McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 95 / 276

4
Configuring iSAN Connections
4-17
Configuring iFCP Connections
NOTE:
Backup connections (identified by Backup in the Connection column)
cannot be selected, even when the backup connection is active. Backup
connections cannot be edited or removed. These connections inherit their
settings from the corresponding primary connection.
CAUTION
When exporting zones across iFCP, make sure the zone members
are device WWNs and not fabric ports, as fabric port zones are not
supported across iFCP.
To configure an iFCP connection going to a remote SAN Router,
follow these instructions:
1. Click
Add
on the
Remote Connections
dialog box to display the
Add
Remote Connections
dialog box ( Figure 4-7 ).