McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 138 / 276

5
5-30
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Configuring iSCSI Authentication
7. Choose
Save Configuration to Flash
from the
File
menu to
permanently save the configuration to flash memory.
Configuring the iSCSI Initiator for Authentication
Refer to the documentation of your iSCSI initiator for instructions on
setting up the initiator for CHAP authentication. Following is a
procedure for using the Microsoft iSCSI initiator.
1. Start the Microsoft iSCSI initiator and enter the iSCSI port IP
address on the SAN Router as the target portal address
(
Figure 5-17 on page 5-30).
Figure 5-17
Add Target Portal Dialog Box
2. Click
Advanced
to display the
Advanced Settings
dialog box.