McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 135 / 276

5
Configuring iSCSI Connections
5-27
Configuring iSCSI Authentication
Using Static Routes
If your RADIUS server is attached via the SAN Router's management
port, then you need to add a static route to the RADIUS server to
reach the TCP port's internal address. Refer to
Figure 5-14 on
page 5-27.
Figure 5-14 RADIUS Server on Management IP Subnet Static Routes
NOTE:
The only way the RADIUS server can access the internal IP network
is through a static route within the RADIUS Server. This allows the RADIUS
server to send the authentication message to the management port which, in
turn, passes the login request to the iSCSI initiator.
For details on setting up different configurations for RADIUS server
access, refer to
Supported RADIUS Server Configurations
on page 5-32.