McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 34 / 276

2
2-10
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Using the Element Manager
Figure 2-3
Management Port Configuration Dialog Box
2. Enter the IP address and subnet mask address for the
management port.
3. Click
Edit Gateway
to add the IP address of the gateway router to
the static route table if any of your management stations are on a
different subnet than the one you are specifying for the
management port.
4. Click
OK
or
Apply
.
5. Choose
Save Configuration to Flash
from the
File
tab to
permanently save the new routing information.