McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 62 / 276

2
2-38
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Static Routes
Figure 2-19
Static Routing Configuration Dialog Box
NOTE:
Use the lower portion of this dialog box to create a permanent
static route to the subnet where your management workstation(s) reside.
For more information, refer to
Configuring the Management Port
on
page 2-9.
•
Destination IP
is the IP address of the destination subnetwork.
•
Destination IP Mask
is the subnet mask of the destination
subnetwork.
•
Next Hop
is the directly-reachable IP address to which the
traffic should be forwarded.
•
Enable Route
is a field you can set to
Enabled
or
Disabled
. The
default is
Enabled
. This allows you to create a route, disable it
and enable it when needed.
•
Edit Status
(along with row color) defines the configuration
state. In a table with multiple entries, a row may say edited,
added or deleted. When you add a new static route, the entry