McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 143 / 276

5
Configuring iSCSI Connections
5-35
Configuring iSCSI Authentication
Figure 5-21
RADIUS Server Located on the Management Subnet
Note that you need to add a static route to the RADIUS server that
tells the IP stack on the RADIUS server that the path to the iSCSI port
of the SAN Router is through its management port IP address.
The RADIUS Server requires a static route logically pointing to SAN
Router’s internal address:
“route add 10.10.10.11 .255.255.255.255. 172.168.10.25.”
Use the “ping” command to verify logical connectivity: “ping
10.10.10.11”.
Figure 5-22 on page 5-36 shows an example of the associated
RADIUS Server Configuration
dialog box in the Element Manager.
Display this dialog box by selecting
RADIUS Server Configuration
under the
Configuration
menu,
iSCSI
submenu.