McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 184 / 276

6
6-36
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Viewing Statistics
2. Click the
Options
button to display the
Chart Options
dialog box
( Figure 6-26 on page 6-36). Use this dialog box to change the
polling interval and the number of displayed intervals. The
default polling interval is five (5) seconds.
Figure 6-26
Chart Options Dialog Box
NOTE:
The polling interval and chart options are saved if you close and
reopen the
Remote Connection Statistics
report and when you close
Element Manager for this SAN Router and log in later. However, if you
switch the web browser to another web page and back, the polling
interval and chart options reverts to the default value unless cookies are
enabled in the web browser.
3. Click
seconds
or
minutes
, and then use the arrow keys or mouse to
adjust the slide bars to change the poll interval or number of
displayed intervals. The charts in the
Remote Connection Statistics
report are updated at each poll.
4. Select the charts you want to display.
5. Click
Apply
. Click
OK
to close the
Chart Options
dialog box.
6. Click
Close
to close the report screen.