5
Configuring iSCSI Connections
5-29
Configuring iSCSI Authentication
3. Enter the UDP port on the RADIUS server to send the
authentication requests. The RFC 2865 defaults this port to 1812,
but can be different for other implementations.
4. Enter the timeout value in seconds. This is the timeout for each
retry. If authentication does not occur and all retries have timed
out, the secondary RADIUS server is contacted.
5. Enter the number of retries. If authentication does not occur after
this number of retries, the next RADIUS server is contacted.
6. Use the
Advanced TCP Configuration
dialog box to set the iSCSI
port to authenticate new initiators.
• Select
Configuration
>
Port
>
FC
/
Ethernet
to display the
FC/Ethernet Port Configuration
dialog box.
• Select the iSCSI port using the
Port number
drop-down list.
• Click
Advanced
to display the
Advanced TCP Configuration
dialog box (refer to
Figure 5-15
).
• Set the
Authentication Method
to
CHAP Required
.
Figure 5-16
Advanced TCP Configuration Dialog Box
Summary of Contents for Eclipse 2640 SAN
