McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 50 / 276

2
2-26
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Configuring System Operations
The values set take effect only after the SAN Router R_Ports are
disabled and enabled (re-initialized).
NOTE:
Changing the cluster ID changes the registered virtual switch node
WWN. This may require the management applications to re-discover the
SAN Router.
Procedure
To set the cluster ID, follow these instructions:
1. Select
Configuration
>
System
>
Operations
to display the
System
Operations
dialog box.
Figure 2-11 System Operations Dialog Box
2. Enter a number for the cluster ID, in the range 1-63.
3. If you want to enable remote access via Telnet, select the option.
4. Click
OK
or
Apply
.
5. Choose
Save Configuration
from the
File
tab to permanently save
your changes to the runtime configuration. This saves the
currently running configuration to flash memory.