2
2-32
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Configuring System Operations
.
.
Table 2-6
Fibre Alliance traps, enterprise 1.3.6.1.3.94
Trap
Name
Description
Severity
1
Conn Unit Status
Change
Sent when the status of a power supply or fan changes.
Info
6
Port Status
Change
A port status has changed. Sent when a port is enabled or disabled, or the
link goes up or down.
Info
(if port up)
Critical if
port
disabled or
down.
Table 2-7
McDATA Eclipse traps, enterprise 1.3.6.1.4.1.4369.3
Trap
Name
Description
Severity
1
SNS Server
The SAN Router has become the primary SNS server.
Info
3
Firmware Loaded A new firmware image has completed a TFTP download to flash memory.
Info
5
Voltage Too High
A power supply voltage has exceeded its rated maximum value.
Critical
6
Voltage Too Low
A power supply voltage has dropped below its minimum allowed value.
Critical
7
Temperature
The SAN Router's internal temperature has exceeded the rated maximum.
Critical
8
Fan Failed
One or more fans have failed in the SAN Router.
Warning
9
Power Supply
Changed State
A power supply has changed state from up to down or down to up.
Warning
14
iFCP Backup Not
Ready Warning
Sent when a primary iFCP port cannot be backed up by its configured
backup port. The backup port may be unreachable or not responding, or the
backup port may be unable to act as backup due to its configuration. This
trap may be sent after the SAN Router is reset, when the configuration is
changed, or when an existing backup port becomes unreachable. This trap
repeats when the backup connection is tried again unsuccessfully. There is
no interruption of storage traffic, but the primary iFCP port is no longer
protected from failure. The text message in the variable binding list includes
the IP address of the primary iFCP port that cannot be backed up, and the IP
address of the port configured to be the backup. The cause of the failure
(such as timeout, rejected, or incorrect configuration) is not provided. There
is no trap sent when the backup relationship is established successfully or
re-established successfully.
Warning
Summary of Contents for Eclipse 2640 SAN
