McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 47 / 276

2
Configuring System Basics
2-23
Configuring System Operations
Configuring System Operations
Configuring the system operations of a SAN Router involves the
following steps:
1. Configuring the system properties
2. Setting the system date and time
3. Setting the SAN Routing Cluster ID
4. Configuring SNMP
5. Configuring the system IP Addresses and static routes
6. Configuring System Metro Storage Name Server (mSNS)
7. Configuring new device zone settings
These steps are described in the following sections.
Configuring System Properties
To configure the system properties, follow these instructions:
1. Choose
Configuration
>
System
>
Properties
to display the
System
Properties
dialog box ( Figure 2-9 on page 2-24).