7
7-6
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Resetting the System
Resetting the System
Certain configuration changes require you to reset the SAN Router
before the changes take effect. Use
File
>
Reset System
from the Element
Manager Window
.
These occurrences are described in previous
chapters and are listed below for reference.
Selecting
Reset System
from the
File
menu displays the
Reset Options
dialog box (
Figure 7-3
).
Figure 7-3
Reset Options Dialog Box
Table 7-2
Resetting the System
Dialog Box
Parameter Changed Requiring Reset
Inband Address Configuration
Configuration
>
System
>
Inband Address
The Router’s inband address, subnet mask address, and gateway
address.
Advanced FC Port Configuration
Configuration
>
Port
>
Advanced FC Port
The error detection and resource allocation timeout values.
Firmware Upgrade
File
>
Firmware Upgrade
The activate boot location.
FC/Ethernet Port Configuration
Configuration
>
Port
>
FC/Ethernet
The TCP port address, subnet mask, next hop gateway address,
internal address
iFCP Setup
Configuration
>
iFCP
>
Setup
The local mSAN ID.
Management Port Configuration
Configuration
>
Port
>
Management
The management address and subnet mask address.
Summary of Contents for Eclipse 2640 SAN
