McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 63 / 276

2
Configuring System Basics
2-39
Static Routes
status is
Added Not Applied
and the row is green. If you select
an entry to be removed, the entry status is
Removed Not Applied
and the row is red.
Important Notes for Static Routes
If the SAN Router is to be managed from a single external subnet,
follow the directions under
Static Routes
.
There are two ways to manage an SAN Router if different
management stations reside in different subnets.
1. Define static routes for each management subnet as described in
Static Routes
.
2. Add a default route by clicking on the
Default Gateway
in the
Static Routing Configuration
dialog box to add the route as the
Static route next hop
.
Adding a Route
1. Click
Add
to display the
Static Routing Parameters
dialog box.
Figure 2-20
Add Static Route Dialog Box
2. Click
Yes
if you wish to enable the route.
3. Type values for the remaining parameters on the dialog box (refer
to Table 2-8 .: