McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 197 / 276

7
Configuration, Firmware, and System Log Maintenance
7-11
Factory Default Settings for the SAN Router
IP Address 0.0.0.0 Configuration>iSCSI>RADIUS Server Configuration
UDP Port 1812 Configuration>iSCSI>RADIUS Server Configuration
Timeout (in seconds) 1 Configuration>iSCSI>RADIUS Server Configuration
Retries 1 Configuration>iSCSI>RADIUS Server Configuration
Secondary RADIUS Server
IP Address 0.0.0.0 Configuration>iSCSI>RADIUS Server Configuration
UDP Port 1812 Configuration>iSCSI>RADIUS Server Configuration
Timeout (in seconds) 1 Configuration>iSCSI>RADIUS Server Configuration
Retries 1 Configuration>iSCSI>RADIUS Server Configuration
iFCP
Local mSAN ID 0 Configuration>iFCP>Setup
Remote Connections None Configuration>iFCP>Remote Connections
Remote Gateway IP Address 0.0.0.0 Configuration>iFCP>Remote Connections>Add
Connection State Enabled Configuration>iFCP>Remote Connections>Add
Connection timeout 10 Configuration>iFCP>Remote Connections>Add
TCP Window Size Auto Configuration>iFCP>Remote Connections>Add
Exported Zones None Configuration>iFCP>Remote Connections>Add
iFCP Port Redundancy
Backup for Port Disabled Configuration>iFCP>Port Redundancy
Timeout for backup activation (in seconds) 5 Configuration>iFCP>Port Redundancy
Recovery Method Manual Configuration>iFCP>Port Redundancy
a. If the SAN Router is shipped in a cabinet, then the default IP address will be 10.xx.yy.zz where,
xx is the cabinet number (1, 2, 3, etc.)
yy is the product type identifier (16 for the Eclipse 2640 SAN Router)
zz is the position in the rack, bottom to top (1, 2, 3, etc.)
Table 7-3
Default Element Manager Parameter Settings (Continued)
Parameter Default Setting Menu Path