McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 84 / 276

4
4-6
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Configuring TCP Ports for iFCP
6. Select the
Flash LED
option to blink the port LED. You can use
this option to locate the physical port in a rack of SAN Routers.
Setting the Advanced TCP Parameters
The SAN Router provides options to optimize the TCP port behavior
through a set of advanced parameters. Use the following procedure
to configure the advanced TCP parameters.
1. Click the
Advanced
button. The
Advanced TCP Configuration
dialog
box appears ( Figure 4-3 on page 4-6).
Figure 4-3
Advanced TCP Configuration
In the TCP section:
• Select
Auto-reset port on severe errors
especially when the port is
a part of a mission-critical configuration.