McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 190 / 276

7
7-4
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Upgrading Firmware (E/OSi)
5. Close and restart the web browser to load the Element Manager
from the new version. After resetting the SAN Router, it may take
two or three minutes for the SAN Router’s embedded web server
to become ready.
Restoring Prior Firmware Version
To restore the prior firmware version in the event you experience
problems on the network with the new version, use the following
procedure.
1. Select
Firmware Upgrade
from the
File
menu.
2. Click the
Activate
button to display the
Activate Boot Location
dialog box ( Figure 7-2 on page 7-3).
3. Click the prior (now inactive) version in the
Activate Boot Location
dialog box, then click
OK
.
4. Choose
Reset System
from the
File
menu to make the version
active.
5. Close and restart the web browser to load the new Element
Manager from the new version. After resetting the SAN Router,
the SAN Router's embedded web server may take two or three
minutes to become active.