Lexmark X95 series, Service Manual

Page: 96 / 1182

2-44
Service Manual
7558- xxx
Go Back
Previous
Next
112.01 LED printhead (C) failure
112.02–112.04 LED printhead (C) signal failure
113.01 LED printhead (M) failure
Step Action and questions Yes No
1
Check the LED Printhead (C) for
proper installation.
Is the LED Printhead (C)
properly installed?
Go to step 2. Install the LED Printhead (C)
properly.
2
Check the event log for the
history of errors that occurred
1. Enter the Diagnostics Menu.
2. Navigate to
EVENT LOG
.
3. Touch
Display Event Log
.
Has any connection-related
errors occurred?
Go to step
“112.02–112.04 LED
printhead (C) signal failure” on
page 2-44
.
Replace the LED Printhead (C).
Go to
“LED printhead removal”
on page 4-105
.
Step Action and questions Yes No
1
Check the LED printhead.
Is the above component
properly connected?
Go to step 2. Replace the connections.
Replace the printhead flat data
cable.
2
Replace the LED printhead.
Go to
“LED printhead removal”
on page 4-105
.
Does the error remain?
Go to step 3. Problem resolved
3
Replace the printhead interface
contact.
Does the error remain?
Go to step 4. Problem resolved
4
POR the machine.
Does the error continue?
Replace the upper printer engine
PCBA.
Go to
“Upper printer engine
PCBA removal” on page 4-189
.
Problem resolved
Step Action and questions Yes No
1
Check the LED printhead (M) for
proper installation.
Is the LED printhead (M)
properly installed?
Go to step 2. Install the LED printhead (M)
properly.