Lexmark X95 series, Service Manual

Page: 285 / 1182

Diagnostic information
2-233
7558- xxx
Go Back
Previous
Next
486.01 Sensor (lower media exit) static jam
3
Check the sensor (upper media
exit) for proper connection.
Is the above component
properly connected?
Replace the sensor (upper media
exit).
Go to
“Sensor (upper media
exit) removal” on page 4-409
.
Replace connections.
4
Check the buffer/transport motor
for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch
MOTOR TESTS
.
3. Touch
FINISHER MOTOR
TESTS
.
4. Touch
Buffer/transport
motor
.
Does the above component
operate properly?
Go to step 6. Go to step 5.
5
Check the buffer/transport motor
for proper connection.
Is the above component
properly connected?
Replace the buffer/transport
motor.
Go to
“Stepper motor (buffer/
transport) and belt (buffer/
transport) removal” on
page 4-417
.
Replace the connection.
6
Check the finisher controller
PCBA for proper connection.
Is the above component
properly connected?
Go to Step 5. Replace the connections.
7
POR the machine.
Does the error continue?
Replace the finisher controller
PCBA.
Go to
“Finisher PCBA removal”
on page 4-356
.
Problem resolved
Step Action and questions Yes No
1
Check the media path.
Is the media path free of any
media fragments?
Go to step 2. Remove any media or media
fragments.
Step Action and questions Yes No