Lexmark X95 series, Service Manual

Page: 381 / 1182

Diagnostic aids
3-29
7558- xxx
Go Back
Previous
Next
Scanner Manual Registration
This setting is for making adjustments to control the scanner’s alignment.
To manually register the scanner and the ADF:
1. Scan a sample document to produce a digital image.
Note:
For the scanner registration, the sample document must be placed facedown on the scanner glass
in the corner with the arrow.
Note:
For the ADF registration, the sample document must be placed faceup on the input bin.
2.
Touch
SCANNER TESTS
from the Diagnostics Menu.
3.
Touch
Scanner Manual Registration
.
4.
Check the alignment of the top and left edges of the digital image produced in step 1. Adjust the scanner
and ADF registration by changing the settings below:
Note: Lead
refers to the edge of the paper parallel to the scanner carriage. Adjusting
FLATBED SS REGI
ADJUST
,
ADF SIDE1 LEAD REGI ADJUST
and
ADF SIDE2 LEAD REGI ADJUST
changes the left margin
settings. Adjusting
FLATBED FS REGI ADJUST
,
ADF SIDE1 LEAD OFFSET ADJUST
and
ADF SIDE2
LEAD OFFSET ADJUST
changes the top margin settings.
•
FLATBED SS REGI ADJUST
•
FLATBED FS REGI ADJUST
•
ADF SIDE1 LEAD REGI ADJUST
•
ADF SIDE1 LEAD OFFSET ADJUST
•
ADF SIDE2 LEAD REGI ADJUST
•
ADF SIDE2 LEAD OFFSET ADJUST
5.
Touch or to adjust the settings.
6.
Touch
Submit
to save the changes or touch
Back
to return to
Scanner Manual Registration
without
saving any changes.