Lexmark X95 series, Service Manual

Page: 383 / 1182

Diagnostic aids
3-31
7558- xxx
Go Back
Previous
Next
3. Select the test from the following options:
ADF/SCANNER SENSOR TESTS
This test verifies that the sensors in the ADF/Scanner are operating properly.
To run these tests:
1. From the Diagnostics Menu, navigate to
SENSOR TESTS
.
2. Select
ADF/SCANNER SENSOR TESTS
.
3. Select the test from the following options:
FINISHER SENSOR TESTS
This test verifies that the sensors in the finisher are operating properly.
• Sensor (transparency detect) • Sensor (MPF media level)
• Sensor (transfer belt HP) • Sensor (upper redrive)
• Sensor (tray 1 media out) • Sensor (fuser exit)
• Sensor (tray 1 media level) • Sensor (paper on belt)
• Sensor (tray 1 media size switch) • Sensor (registration)
• Sensor (tray 1 pre feed) • Sensor (MPF feed out)
• Sensor (tray 2 media out) • Sensor (duplex wait)
• Sensor (tray 2 media level) • Sensor (lower redrive shift HP)
• Sensor (tray 2 feed out) • Sensor (upper redrive shift HP)
• Sensor (tray 2 media size) • Sensor (standard bin 1 media full)
• Sensor (tray 3 media out) • Sensor (standard bin 2 media full)
• Sensor (tray 3 media level) • Sensor (printer left door interlock)
• Sensor (tray 3 feed out) • Sensor (upper redrive door interlock)
• Sensor (tray 3 media size) • Sensor (printer front door interlock)
• Sensor (tray 3 pre feed) TTM only • Sensor (duplex door interlock)
• Sensor (tray 4 media out) • Sensor (tray module left door interlock)
• Sensor (tray 4 media level) • Sensor (waste toner bottle present)
• Sensor (tray 4 feed out) • Sensor (waste toner bottle full)
• Sensor (tray 4 media size) • Sensor (1st transfer rolls retract HP)
• Sensor (tray 4 pre feed) TTM only • Sensor (2nd transfer roll retract HP)
• Sensor (MPF media out)
• Sensor (ADF document set) • Sensor (ADF scan width 1)
• Sensor (ADF registration) • Sensor (ADF scan width 2)
• Sensor (ADF feed out) • Sensor (ADF scan width 3)
• Sensor (ADF pre registration) • Sensor (ADF document tray length 1)
• Sensor (ADF inverter) • Sensor (ADF document tray length 2)
• Sensor (ADF top door interlock) • Sensor (FB scanner HP)
• Sensor (ADF closed interlock) • ADF connection detected
• Sensor (ADF document tray width 1) • Sensor (FB platen length 1)
• Sensor (ADF document tray width 2) • Sensor (FB platen length 2)
• Sensor (ADF document tray width 3) • Sensor FB angle)