Lexmark X95 series, Service Manual

Page: 362 / 1182

3-10
Service Manual
7558- xxx
Go Back
Previous
Next
To change this setting:
1. From the Configuration Menu, navigate to
Envelope Prompts
.
2. Touch or to change the setting.
3. Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.
Erase all Information on Disk
To run this operation:
1. From the Configuration Menu, navigate to
Erase all Information on Disk
.
2. Touch
Single Pass Erase
or
Multiple Pass Erase
.
Exit Tray 2
To change this setting:
1.
From the Configuration Menu, navigate to
Exit Tray 2
.
2.
Touch or to change the setting.
3.
Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.
Factory Defaults
Warning:
This operation cannot be undone.
This setting enables a user to restore all of the device’s settings to either the network settings (on network
models only) or to the base device settings.
To restore the Factory Default settings:
1. From the Configuration Menu, navigate to
Factory Defaults
.
2. Touch
Restore Base
to restore all non-critical base printer NVRAM settings.
3. Touch
Restore STD Net
to restore all network NVRAM settings.
4. Touch
Restore LES
to remove all Lexmark Embedded Solution applications .
After this setting is changed, the device automatically performs a POR, and restores the appropriate settings to
their factory default values.
Fax Low Power Support
To change this setting:
1. From the Configuration Menu, navigate to
Fax Low Power Support
.
2. Touch or to change the setting.
3. Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.