Preventive maintenance
6-1
7558-
xxx
Go Back
Previous
Next
6. Preventive maintenance
This chapter describes procedures for printer preventive maintenance. Follow these recommendations to help
prevent problems and maintain optimum performance.
Inspection guide
The purpose of this inspection guide is to aid you in identifying the intervals, based on page count, at which parts
must be inspected (for visible physical damage), cleaned, or replaced.
As you service the machine, check the following:
•
Damaged, missing, or altered parts, especially in the area of the On/Off switch and the power supply
•
Damaged, missing, or altered covers, especially in the area of the top cover and the power supply cover
•
Possible safety exposure from any non-Lexmark attachments
Lexmark X950, X952, X954
EVERY
SERVICE
CALL
EVERY
160K
EVERY
320K
EVERY
480K
NOTES
MEDIA TRAY—ALL
Media side guides
Inspect
Inspect
Inspect
Inspect
Check for correct positioning
Media end guide
Inspect
Inspect
Inspect
Inspect
Check for correct positioning
Separation
pad
Inspect
Clean Clean Clean
Damp
cloth
Tray lift gear assembly
Inspect
Inspect
Inspect
MEDIA FEEDERS—ALL
Feed roller
Inspect
Replace
Replace
Replace
Verify page count before replacing
Pick roller
Inspect
Replace
Replace
Replace
Verify page count before replacing
Separation roller
Inspect
Replace
Replace
Replace
Verify page count before replacing
MPF feed rollers
Inspect
Inspect
Inspect
Clean
Water or alcohol
Media transport roll assembly
Clean
Clean
Clean
Water or alcohol
Sensor (registration)
Clean
Clean
Clean
Brush or blower brush
Sensor (tray 1 feed-out)
Clean
Clean
Clean
Brush or blower brush
Sensor (tray 2 feed-out)
Clean
Clean
Clean
Brush or blower brush
Sensor (tray 3 feed-out)
Clean
Clean
Clean
Brush or blower brush
Sensor (tray 4 feed-out)
Clean
Clean
Clean
Brush or blower brush
PRINTHEAD
Printhead slit glass (4)
Clean
Clean
Clean
Clean
Printhead cleaning tool
Summary of Contents for X95 series
