Lexmark X95 series, Service Manual

Page: 401 / 1182

Diagnostic aids
3-49
7558- xxx
Go Back
Previous
Next
250 paper jam
1. Remove any jammed pages from the multipurpose feeder.
2. Load paper into the multipurpose feeder.
3. If necessary, touch
Continue, jam cleared
from the printer control panel.
281 paper jam
Paper jam in door A
1. Open door A.
2.
Determine where the jam is located, and then remove it:
2.1
If the paper is visible under the fuser, then firmly grasp it on each side, and pull it out.
Note:
Make sure all paper fragments are removed.
2.2
If the paper is not visible, then you will need to remove the fuser unit.
CAUTION—HOT SURFACE:
The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow
the surface to cool before touching.