Lexmark X95 series, Service Manual

Page: 45 / 1182

General information
1-11
7558- xxx
Go Back
Previous
Next
Paper transport
• The paper capacity is 50 sheets.
• Finishing options are not supported in this bin.
• Envelopes are routed here.
• Universal paper is routed here when it is longer than 483 mm (19 in.) or shorter than 148 mm (6 in.).
Finisher standard bin
• The paper capacity is 500 sheets.
• Envelopes and executive-size paper are not supported in this bin.
• Finishing options are not supported in this bin.
Bin 1
• The paper capacity is 3,000 sheets when the standard finisher is installed.
• The paper capacity is 1,500 sheets when the booklet finisher is installed.
Bin 1 finishing features
Size
Pun
c
h*
Of
fs
e
t
Si
ngl
e/
D
o
ubl
e
st
apl
e
Dou
b
le
dual
st
ap
le
A3
✔ ✔ ✔ ✔
A4
✔ ✔ ✔ ✔
A5
✘ ✘ ✘ ✘
Executive
✔ ✔ ✔ ✘
Folio
✘ ✔ ✔ ✘
JIS B4
✔ ✔ ✔ ✘
JIS B5
✔ ✔ ✔ ✘
Legal
✘ ✔ ✔ ✘
Letter
✔ ✔ ✔ ✔
Statement
✘ ✘ ✘ ✔
Tabloid
✔ ✔ ✔ ✘
Universal
✔ ✔ ✔ ✔
Envelopes (any size)
✘ ✘ ✘ ✘
*For the Universal paper size, the finishing edge must be at least 9 in. (229
mm) for a 3-hole punch and 10 in. (254 mm) for a 4-hole punch.
Punch
—Selects from two-, three-, or four-hole punch
Single staple
—Uses only one staple
Double staple
—Uses two staples
Double dual staple
—Uses two sets of two staples. This setting is supported
only for widths between 8 in. (203 mm) and 12 in. (297 mm) with lengths
between 7 in. (182 mm) and 17 in. (432 mm).
✔
—Supported
✘
—Not supported