Lexmark X95 series, Service Manual

Page: 145 / 1182

Diagnostic information
2-93
7558- xxx
Go Back
Previous
Next
200.03 Sensor (registration) late jam (feeding from the tray)
3
Check the sensor (registration)
for proper connection.
Is the above component
properly connected?
Replace the registration/transport
roll assembly.
Go to
“Registration/transport
roller assembly removal” on
page 4-152
.
Replace the connections.
4
Check the registration/transport
roll assembly.
Is the above component free of
excess wear and
contamination?
Go to step 5. Clean or replace the registration/
transport roll assembly.
Go to
“Registration/transport
roller assembly removal” on
page 4-152
.
5
POR the machine, and perform a
PRINT test.
Go to
“PRINT TESTS” on
page 3-26
.
Does the error continue?
Replace the lower engine PCBA.
Go to
“Lower engine PCBA
removal” on page 4-106
.
Go to step 6.
Problem resolved
6
POR the machine, and perform a
PRINT test.
Go to
“PRINT TESTS” on
page 3-26
.
Does the error continue?
Replace the upper printer engine
PCBA.
Go to
“Upper printer engine
PCBA removal” on page 4-189
.
Problem resolved
Step Action and questions Yes No
1
Check the media path.
Is the media path free of any
media fragments?
Go to step 2. Remove any media or media
fragments.
2
Check the sensor (registration)
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch
SENSOR TESTS
.
3. Touch
PRINTER SENSOR
TESTS
.
4. Touch
Sensor (registration)
.
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Go to step 4. Go to step 3.
3
Check the sensor (registration)
for proper connection.
Is the above component
properly connected?
Replace the registration/transport
roll assembly.
Go to
“Registration/transport
roller assembly removal” on
page 4-152
.
Replace the connections.
Step Action and questions Yes No