Lexmark X95 series, Service Manual, Page: 367 / 1182

Diagnostic aids
3-15
7558- xxx
Go Back
Previous
Next
To change this setting:
1. From the Configuration Menu, navigate to
SIZE SENSING
. The screen displays each size sensing
equipped input source and its current Size Sensing setting.
2. Select the appropriate input source.
3. Touch
or to change the setting.
4.
Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.
A5/Statement
Due to engine limitations, Trays 1 through 4 cannot simultaneously sense A5- and statement-size paper. The
value of this setting determines which of the two paper sizes these trays will sense automatically. This setting
will apply to all automatic trays, but not to the MP Feeder. The MP Feeder can support these paper sizes
regardless of the value of this setting.
B5/Executive
Due to engine limitations, Trays 1 through 4 cannot simultaneously sense executive and JIS-B5-size paper. The
value of this setting determines which of the two paper sizes these trays will sense automatically. This setting
will apply to all automatic trays, but not to the MP Feeder. The MP Feeder can support these paper sizes
regardless of the value of this setting.
Tray Insert Message Delay
This setting determines how many seconds the panel will display
Tray Insert
after a user has inserted a tray
into the printer.
To change this setting:
1. From the Configuration Menu, navigate to
Tray Insert Message Delay
.
2. Touch or to change the value.
3. Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.
UI Automation
When set to
Enable
, this setting allows external developers to measure the stability of their applications by
performing their own automated testing against the device.
To change this setting:
1.
From the Configuration Menu, navigate to
UI Automation
.
2.
Touch or to change the value.
3.
Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.
USB Scan to Local
To change this setting:
1.
From the Configuration Menu, navigate to
USB Scan to Local
.
2.
Touch or to change the value.
3.
Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.
USB Speed