Lexmark X95 series, Service Manual

Page: 283 / 1182

Diagnostic information
2-231
7558- xxx
Go Back
Previous
Next
485.03 Sensor (upper media exit) late jam
3
Check the sensor (upper media
exit) for proper connection.
Is the above component
properly connected?
Replace the sensor (upper media
exit).
Go to
“Sensor (upper media
exit) removal” on page 4-409
.
Replace connections.
4
Check the finisher controller
PCBA for proper connection.
Is the above component
properly connected?
Go to Step 5. Replace the connections.
5
POR the machine.
Does the error continue?
Replace the finisher controller
PCBA.
Go to
“Finisher PCBA removal”
on page 4-356
.
Problem resolved
Step Action and questions Yes No
1
Check the media path.
Is the media path free of any
media fragments?
Go to step 2. Remove any media or media
fragments.
2
Check the sensor (upper media
exit) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch
SENSOR TESTS
.
3. Touch
FINISHER SENSOR
TESTS
.
3. Touch
Sensor (upper media
exit)
.
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Go to Step 4. Go to Step 3.
3
Check the sensor (upper media
exit) for proper connection.
Is the above component
properly connected?
Replace the sensor (upper media
exit).
Go to
“Sensor (upper media
exit) removal” on page 4-409
.
Replace connections.
Step Action and questions Yes No