Diagnostic information
2-37
7558-
xxx
Go Back
Previous
Next
846.00
Service scanner
failure
Scanner communication failure
Controller detected failures. Scanner
download timeout.
Go to
“846.00 Scanner communication
failure” on page 2-258
.
846.01
Service scanner
failure
Scanner communication failure
Controller detected failures. Detected I/O
failure.
Go to
“846.01 Scanner communication
failure” on page 2-258
.
846.10
Service scanner
failure
Sensor (ADF scan width [x]) failure
The combinations of outputs from the
sensor (ADF scan width 1), sensor (ADF
scan width 2) and sensor (ADF scan width
3) are abnormal.
Go to
“846.10 Sensor (ADF scan width
[x]) failure” on page 2-259
.
846.12
Service scanner
failure
Scanner unit assembly software logic
failure
A software failure was detected by the
scanner controller card assembly.
Go to
“846.12 Scanner unit assembly
software logic failure” on page 2-260
.
846.13
Service scanner error
Switch (platen interlock) open
The system detected that the switch
(platen interlock) is open.
Go to
“846.13 Switch (platen interlock)
open” on page 2-261
.
849.00
Service hard drive
error
Hard drive/configuration ID mismatch
The device does not have a hard drive
installed, even though its configuration ID
indicates that a hard drive should be
present.
Go to
“849.00 Hard drive failure” on
page 2-261
.
9xx service error codes
Error code
Description
Action
900.xx
System software
error
Unrecoverable RIP software error /
illegal trap
Go to
“Steps before starting the 9yy
service checks” on page 2-262
.
Go to
“900.xx System software error”
on page 2-263
.
910.02
Service data error
Data communication error
Firmware upgrade is needed.
Go to
“910.02–910.07 Data
communication error” on page 2-266
.
910.03
Service data error
Data communication error
Firmware upgrade is needed.
Go to
“910.02–910.07 Data
communication error” on page 2-266
.
910.04
Service data error
Data communication error
Firmware upgrade is needed.
Go to
“910.02–910.07 Data
communication error” on page 2-266
.
8xx service error codes
Error code
Description
Action
Summary of Contents for X95 series
