Lexmark X95 series, Service Manual

Page: 384 / 1182

3-32
Service Manual
7558- xxx
Go Back
Previous
Next
To run these tests:
1. From the Diagnostics Menu, navigate to
SENSOR TESTS
.
2. Select
FINISHER SENSOR TESTS
.
3. Select the test from the following options:
Service Engineer (SE) Menu
Print SE Menus
General
Copyright
—Displays copyright information
Optra Forms mode
—On or off
Code Revision Info
Network Code Level
—Displays network code level
Network Compile Info
—Displays compile information
Printer Code Level
—Displays printer code information
Available finisher sensor tests:
• Sensor (booklet knife HP) • Sensor (rear tamper HP)
• Sensor (booklet compiler media
present)
• Sensor (stapler carriage HP)
• Sensor (booklet media exit) • Sensor (staple low)
• Sensor (booklet unit interlock) • Sensor (staple self priming)
• Sensor (booklet front staple low) • Sensor (staple motor HP)
• Sensor (booklet rear staple low) • Sensor (media eject clamp HP)
• Sensor (booklet bin media present) • Sensor (media eject shaft HP)
• Sensor (booklet front tamper HP) • Sensor (stacker bin upper limit)
• Sensor (booklet media entracne) • Sensor (stacker bin no media)
• Sensor (booklet rear tamper HP) • Sensor (stacker bin level encoder)
• Sensor (booklet end guide HP) • Sensor (stacker bin level 1)
• Sensor (booklet knife folding) • Sensor (stacker bin level 2)
• Sensor (finisher media entrance) • Sensor (punch carriage shift HP)
• Sensor (buffer path) • Sensor (punch cam HP)
• Sensor (diverter gate) • Sensor (punch cam front)
• Sensor (upper media exit) • Sensor (punch cam hole select)
• Sensor (lower media exit) • Sensor (punch unit motor encoder)
• Sensor (compiler media present) • Sensor (punch waste box set)
• Sensor (bridge media entrance) • Sensor (bridge bin exit)
• Sensor (bridge media exit) • Sensor (deculer cam HP)
• Sensor (punch side reg 1) • Sensor (eject cover interlock)
• Sensor (punch side reg 2) • Sensor (finisher front door interlock)
• Sensor (upper media bin full) • Sensor (bridge top door interlock)
• Sensor (front tamper HP)