Lexmark X95 series, Service Manual

Page: 855 / 1182

Repair information
4-361
7558- xxx
Go Back
Previous
Next
5. Remove the two screws securing the bin bracket (C) to the right carriage bracket (D).
6. Remove the spring (E) from the right carriage bracket (D).
7. Remove the screw securing the upper belt clamp (F) to the right carriage bracket (D).
8. Remove the upper belt clamp (F).
9. Remove the right carriage bracket (D) with the finisher right carriage belt assembly (G) from the finisher.
10. Release the hook securing the finisher right carriage belt assembly (G) to the lower belt clamp (H).
11. Remove the finisher right carriage belt assembly (G).
Reinstallation notes:
• Make sure the finisher right carriage belt assembly (G) is inserted into the upper belt clamp (F) as shown.
• Make sure the bin bracket (C) is level to prevent binding.
C
D
E
F
G
Rear
H