Lexmark X95 series, Service Manual, Page: 368 / 1182

3-16
Service Manual
7558- xxx
Go Back
Previous
Next
To change this setting:
1. From the Configuration Menu, navigate to
USB Speed
.
2. Touch or to change the value.
3. Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.
Wipe All Settings
The purpose of this setting is to make any sensitive information that may exist on the device’s storage
completely indecipherable.
To run this setting:
1.
From the Configuration Menu, navigate to
Wipe All Settings
.
2.
The screen displays the following messages
Erase all information on the hard disk?
This will erase all settings, solutions, and jobs on this device.
3. Touch
Yes
to erase, or touch
No
to cancel the operation and return to the Configuration Menu without
saving any changes.