Preface
xxxi
7558-
xxx
Go Back
Previous
Next
Change history
Revision date
Updates
2014/11/20
Added scanner calibration information in the
“Diagnostics Menu” on page 3-17
.
2014/10/10
Removed the Registration topic from the Diagnostic aids chapter.
2014/09/05
• Updated the 121.04, 121.06, and 121.08 service checks in the Diagnostics information
chapter.
• Added PN 40X6091 in the parts catalog.
2014/08/12
Parts catalog assembly 9—Deleted part numbers 40X6973 and 40X6307, and replaced
them with 40X9241.
2014/05/05
• Updated
“Booklet maker 2” on page 7-87
, removed the booklet controller card in the
art and table.
• Updated
“Finisher—electronics” on page 7-84
, added the booklet controller card in
the art and table.
2014/01/10
Changed PN 40X0727 to 40X6676 for the Sensor (Tray module feedout) in Assembly 37:
TTM media feed 2 of the parts catalog.
2013/12/05
• Updated description for error code 121.12 to “Fuser failure” from “Incorrect fuser.”
• Updated the action description to “Wrong fuser is possibly installed or fuser drive PCBA
has failed” from “Wrong fuser is installed.”
• Updated
“121.12 Fuser failure” on page 2-62
.
2013/11/4
Parts catalog Assembly 55: Changed P/N to 40X7464 to 40X6726.
2013/10/21
Parts catalog Assembly 37:
• Updated description of 40X7334
• Added 40X0588 and 40x0727
• Deleted 40X7336, 40X7337, and 40X7338
2013/10/7
Replaced 40X7511 with 40X7512 in Parts catalog Assembly 108.
2013/9/4
Replaced 40X0727 with 40X7334 in the Parts catalog Assembly 37.
2013/08/01
• Updated Parts catalog Assembly 37.
• Added “Steps before starting the 9yy service checks”.
2013/07/11
• Updated the Bridge PCBA (MFP) part number.
• Added the following error codes and service checks: 146, 324, 334, 344, and 354.
2013/04/26
• Updated Assembly 62 to show the proper orientation of the parts catalog illustration.
• Added the rear lower cover removal procedure before the step “Disconnect the input
option cable (A)” in the repair chapter.
2013/02/25
Updated Assembly 18 of the parts catalog to the show proper order of the augers.
2012/08/15
Replaced part number 40X7421 to 40X8663 in
“Finisher—stacker bin lift” on page 7-73
of the parts catalog.
2012/08/01
Updaed the Bridge PCBA (MFP) part number in
“Electrical 1” on page 7-57
of the parts
catalog.
2012/07/02
Added part number 40X0580 in
“Media feed 1” on page 7-27
,
“TTM trays” on page 7-36
,
and
“Tray module media feed” on page 7-31
in the parts catalog.
Summary of Contents for X95 series
