Functions
Leuze electronic GmbH + Co. KG
CML 730i
40
Filter depth “1” = the beam states of each measurement cycle are output.
Filter depth “3” = only those beam state changes that were stable over three measurement cycles are
output.
Filter depth can be configured via the respective fieldbus interface (see chapter 10 et seq.) or via
the
Sensor Studio
configuration software (see chapter 16).
At maximum receiving sensitivity, the receiver reacts to extremely minor violations of the detec
-
tion field.
To debounce the validation signal, it is recommended to configure a waiting time of 100 ms in
the control.
After the device has been switched on, measurement readiness is NOT signaled when triggering
is activated and the trigger-input signal is missing.
