Starting up the device - Basic configuration
Leuze electronic GmbH + Co. KG
CML 730i
65
Figure 8.2: Display showing an optimally aligned light curtain
Tighten the fastening screws of the transmitter and receiver.
Transmitter and receiver are aligned.
Switching to process mode
After aligning, switch to process mode.
Select Display > Mode > Process mode.
The display in the receiver of the light curtain shows the process mode states with the total of interrupted
beams (TIB) and the logic states of the digital inputs/outputs (digital IOs).
Figure 8.3: Display showing the process mode state of the light curtain
The structure of the configuration in the receiver control panel menu is as follows:
Switching to alignment mode
You can switch from process mode to alignment mode via the menu.
Select Display > Mode > Alignment.
The structure of the configuration in the receiver control panel menu is as follows:
NOTICE
Minimum sensitivity of the sensor!
In order to perform a teach, a minimum level must be reached in the bar graph indicator (mark in the
middle of the display).
Level 0
Level 1
Level 2
Description
Display
Language
English
German
French
Spanish
Italian
Operating
mode
Process Mode Alignment
Level 0
Level 1
Level 2
Description
Display
Language
English
German
French
Spanish
Italian
Operating
mode
Process mode Alignment
