Starting up the device - PROFINET interface
Leuze electronic GmbH + Co. KG
CML 730i
137
13.4.18 Extended settings (module 31)
The filter depth indicates the necessary number of consistent beam states before the evaluation of the
measurement values. All measurement values are accumulated and retained over the duration of the inte
-
gration time.
• Module ID: 1031
• Submodule ID: 1
13.4.19 Configuration of digital IOs (module 32)
Configuration of digital inputs/outputs. The digital inputs/outputs can be set to positive switching (PNP) or
to negative switching (NPN). The switching behavior applies the same for all inputs/outputs.
The digital inputs/outputs are configured via pin 2 and/or pin 5.
• Module ID: 1032
• Submodule ID: 1
Parameter
Rel.
address.
Data type
Value range
Default Explanation
Operating mode
0.0
Bit field
0 … 2
0
0: Parallel-beam scanning
1: Diagonal-beam scanning
2: Crossed-beam scanning
Counting direction
0.3
Bit
0 … 1
0
0: Normal (interface → )
1: Inverted ( → interface)
Smoothing
1
USIGN 8
1 … 255
1
Smoothing:
Fewer than i interrupted beams are ignored.
Inverted smoothing
2
USIGN 8
1 … 255
1
Inverted smoothing:
Fewer than i free beams are ignored.
Parameter data length: 3 bytes
Parameter
Rel.
address.
Data type
Value range
Default
Explanation
Autoteach on power-on
0.0
Bit
0 … 1
0
Automatic teach on power-on
0: Not active
1: Active
Key lock on the display
0.1
Bit
0 … 1
0
0: Not active
1: Active
Filter depth
1
USIGN 8
1 … 255
1
The filter depth indicates the necessary number of
consistent beam states before the evaluation of the
measurement values. The filter depth corresponds
to the number of passes (measurement cycles) with
interrupted beam so that the result leads to switch
-
ing.
Integration/hold time
2
USIGN 16
1 … 65535
1
All measurement values are accumulated and
retained over the duration of the integration time.
Unit: ms
Parameter data length: 4 bytes
Parameter
Rel.
address.
Data type
Value range
Default
Explanation
Switching level of digital I/Os
0.0
Bit
0 … 1
1
0: Transistor, NPN
1: Transistor, PNP
Configuration of pin 2
Pin 2 - Input/output selection
0.1
Bit
0 … 1
1
0: Output
1: Input
Pin 2 - Switching behavior
0.2
Bit
0 … 1
0
0: Light switching: HIGH active
1: Dark switching: LOW active
Pin 2 - Input function
0.3
Bit field
0 … 2
1
0: Not active
1: Trigger input
2: Teach input
