Starting up the device - PROFINET interface
Leuze electronic GmbH + Co. KG
CML 730i
141
13.4.25 Control commands (module 80)
• Module ID: 1080
• Submodule ID: 1
Description of commands:
End beam mode
1.3 … 1.5 Bit field
0 … 5
1
0: Used beam number
1: Target minimum (FS)
2: Last not interrupted beam (LNIB)
3: Last interrupted beam (LIB)
4: First not interrupted beam (FNIB)
5: First interrupted beam (FIB)
End beam of area
4
USIGN 16
1 … 1774
1
Valid beam in area 1 … 1774
Number of active beams ON
6
USIGN 16
0 … 1774
0
Number of active beams OFF
8
USIGN 16
0 … 1774
0
Specified middle of the area
10
USIGN 16
0 … 1774
0
Specified width of the area
12
USIGN 16
0 … 1774
0
Parameter data length: 14 bytes
Parameter
Rel.
address.
Data type
Value range
Default Explanation
Output data
PLC -> CML
Description
Relative address
Data type
Value range
Initial value
Trigger byte
Changing the data value triggers a trig
-
ger for executing the command.
Changing from a state > 0 to a state = 0
does not trigger a trigger.
0
Unsigned 8
0 ... 255
0
Command
Selection of the command that is to be
executed in the CML. The command is
only activated after the trigger byte is
changed.
1
Unsigned 8
0
0
Argument
Additional argument that is used with
some commands to transfer additional
information to the CML.
2
Unsigned 16
0 ... 65535
0
Output data length: 4 byte
Input data
PLC -> CML
Description
Relative address
Data type
Value range
Initial value
Trigger echo
Trigger byte with which command execu
-
tion was performed.
0
Unsigned 8
0 ... 255
0
Command echo
Command byte with which command
execution was started..
1
Unsigned 8
Response/status
Response/status of the last command
execution
Highbyte:
0x00 = Waiting for command
0x01 = Receiver (Rx) received com
-
mand
0x10 = Confirmation (ACK) received
from receiver (Rx)
0x20 = No confirmation (NACK) received
from receiver (Rx)
Lowbyte:
As reserve for extensions
2
Unsigned 16
0 ... 65535
0
Output data length: 4 byte
Command no.
Description
Argument
Explanation
0
No command
-
3
Trigger teach
-
4
Reboot of the receiver device
-