Functions
Leuze electronic GmbH + Co. KG
CML 730i
31
4.8
Smoothing
With the smoothing function, interrupted beams are then only taken into account in the evaluation if the set
minimum number of adjacent beams is reached at the same time.
Smoothing can be used, e.g., to suppress interference caused by spot soiling of the lens cover.
Smoothing “1” means that every interrupted beam is evaluated.
1
Data output: beam number x interrupted
Figure 4.7: Smoothing configuration “1”
If smoothing is set to a value of “3”, for example, data is only output if at least three adjacent beams are
interrupted.
1
Data output: 0 beams interrupted
Figure 4.8: Smoothing configuration “3”, but no more than two adjacent beams interrupted
1
1
