Starting up the device - PROFIBUS interface
Leuze electronic GmbH + Co. KG
CML 730i
124
"0x" designates the corresponding entry as hexadecimal number. The actual entry consists only
of the following digits and is also only to be entered as such.
The trigger echo is not accepted until after the receiver answer (Rx answer) is received. A trigger
byte change is ignored during "Answer" state 0x0100.
For controls of type Siemens S7, the lowbyte/highbyte sequence is to be taken into account for
WORD and DWORD!
With these controls, the addressing sequence in single-byte output shows the highbyte first and
then the lowbyte.
