Device description
Leuze electronic GmbH + Co. KG
CML 730i
15
1
Transmitter
2
Receiver
3
IO Logic with control panel
4
Control (PLC)
5
Connection and synchronization cable for supply voltage and transmitter/receiver synchronization
6
Connection cable for measurement data interface; connection of X2A to control
Figure 3.2: PROFINET system in combination with a programmable logic control
3.2
General performance characteristics
The most important performance characteristics of the CML 730i series are:
The most important performance characteristics of the CML 730-PS series are:
• Operating range up to 9500 mm
• Measurement field length from 150 mm to 2960 mm
• Beam spacings of 5 mm, 10 mm, 20 mm, 40 mm
• Response time 10 µs per beam
• Beam modes: parallel, diagonal, crossed-beam
• Single-beam evaluation (beam-stream)
• Evaluation functions: TIB, TNIB, LIB, LNIB, FIB, FNIB, status of beam areas 1 … 32, status of the
digital inputs/outputs
• Local control panel with display
• Interfaces to the machine control:
• IO-Link:
4 digital inputs/outputs (configurable)
• CANopen, PROFIBUS-DP, RS 485 Modbus, PROFINET:
2 digital inputs/outputs (configurable) plus IO-Link
• Analog:
2 analog current/voltage outputs plus IO-Link
2 digital inputs/outputs (configurable)
• Blanking of unnecessary beams
• Smoothing for interference suppression
• Cascading of multiple devices
• Block evaluation of beam areas
• Position / hole recognition with continuous web material
• Detection of transparent media
X2A
X2B
X3
3
2
4
1
X1
5
6
