Starting up the device - PROFINET interface
Leuze electronic GmbH + Co. KG
CML 730i
138
13.4.20 Teach settings (module 33)
In most applications, it is recommended that the teach values be stored in non-volatile memory.
The sensitivity for the teach event is higher or lower depending on the function reserve selected for the
teach.
• high function reserve = low sensitivity for teach event
• low function reserve = high sensitivity for teach event
• Module ID: 1033
• Submodule ID: 1
Pin 2 - Output function
0.5
Bit field
0 … 3
0
0: Not active
1: Switching output (area 1 … 32)
2: Warning output
3: Trigger output
Pin 2 - Time module operating
mode
1
Bit field
0 … 4
0
0: Not active
1: Start-up delay
2: Switch-off delay
3: Pulse stretching
4: Pulse suppression
Pin 2 – delay time
2
USIGN 16
0 … 65535
0
Affects the selected function of the time module.
Unit: ms
Pin 2 - Area mapping 32 … 1
4
USIGN 32
Bit 0 … 31
0: Area not
assigned
1: Area assi
-
gned
Assignment is performed by masking the corre
-
sponding bits
Configuration of pin 5
Pin 5 - Input/output selection
8.1
Bit
0 … 1
0
0: Output
1: Input
Pin 5 - Switching behavior
8.2
Bit
0 … 1
0
0: Light switching: HIGH active
1: Dark switching: LOW active
Pin 5 - Input function
8.3
Bit field
0 … 2
0
0: Not active
1: Trigger input
2: Teach input
Pin 5 - Output function
8.5
Bit field
0 … 3
2
0: Not active
1: Switching output (area 1 … 32)
2: Warning output
3: Trigger output
Pin 5 - Time module operating
mode
9
Bit field
0 … 4
0
0: Not active
1: Start-up delay
2: Switch-off delay
3: Pulse stretching
4: Pulse suppression
Pin 5 – Delay time
10
USIGN 16
0-65535
0
Affects the selected function of the time module.
Unit: ms
Pin 5 - Area mapping 32 … 1
12
USIGN 32
Bit 0 … 31
0: Area not
assigned
1: Area assi
-
gned
0
Assignment is performed by masking the corre
-
sponding bits
Parameter data length: 16 bytes
Parameter
Rel.
address.
Data type
Value range
Default
Explanation
