Leuze 50117911, Original Operating Instructions

Page: 108 / 231

Starting up the device - CANopen interface
Leuze electronic GmbH + Co. KG CML 730i 108
Process data (group 13)
Parameter Index
(hex.)
Sub-
index
(hex.)
Data
type
Access Min.
value
Max. value Default Explanation
Signal level of first beam 2404 1 t16U RO Signal level on beam no. 1
Signal level of last beam 2404 2 t16U RO Signal level on beam no. i
Configuration of the process data:
- First interrupted/not interrupted beam (FIB/FNIB),
- Last interrupted/not interrupted beam (LIB/LNIB),
- Total of interrupted/not interrupted beams (TIB/TNIB);
- Area Out 1 … 16 or 17 … 32; digital inputs/outputs
Parameter Index
(hex.)
Sub-
index
(hex.)
Data
type
Access Min.
value
Max. value Default Explanation
First interrupted beam (FIB) 2405 t16U RO First interrupted beam
First not interrupted beam (FNIB) 2406 t16U RO First not interrupted beam
Last interrupted beam (LIB) 2407 t16U RO Last interrupted beam
Last not interrupted beam (LNIB) 2408 t16U RO Last not interrupted beam
Total of interrupted beams (TIB) 2409 t16U RO Sum of interrupted beams
Total of not interrupted beams (TNIB) 240A t16U RO Sum of not interrupted beams
Area output - LoWord 240D t16U RO Logical value of areas 1 … 16
Area output - HiWord 240E t16U RO Logical value of areas
17 … 32
Status of the digital inputs/outputs 240F t16U RO Representation of the hard
-
ware switching outputs; these
are mapped to the areas
CML 700i status information 2411 t16U RO Bits 0 … 11: measurement
cycle number of a measure
-
ment;
Bits 12 … 13: reserved;
Bit 14: 1 = Event (is set if the
status changes. As soon as
the status is 0 again, bit 14 is
also set to 0.)
Bit 15: 1 = valid measure
-
ment result exists