crystal User Manual
Version: 6.6.0/2
87/459
7. Operation
7.10.7
EQ
EQ parameters are available for all four MIC sources and some of the other sources.
To check if EQ is supported, press the source's
ACCESS
key and then look at VisTool - if the EQ graph (and
parameters) appear, then the DSP is available. Alternatively, look at the Central Module:
EQ
key lit = dynamics
available.
The EQ provides a 3-band parametric EQ plus high-pass and low-pass filters. The filters can be used either as
fixed slope filters (12dB per octave) or shelving EQ.
Ø
To access the EQ parameters, press an
ACCESS
key followed by
EQ
on the Central Module.
The fader strip controls update to show the last page adjusted - in our example, the 3-band equalizer:
Surface Controls (3-band EQ)
VisTool
Ø
Press down on the left (master) rotary control to access the second page (for the 2-band Filters).
Ø
Press again to return to the 3-band parametric EQ (page 1).
The EQ graph on VisTool shows all five bands of EQ simultaneously. This provides a great overview of the
complete section.
