manualshive.com logo in svg

LAWO crystal, User Manual

The Barrett Crystal Technical Manual is an essential resource for users of this powerful crystal technology. This comprehensive manual provides step-by-step instructions, troubleshooting tips, and maintenance advice to ensure optimal performance. Download the manual for free from manualshive.com and unlock the full potential of your Barrett Crystal.

Share
Download
background image

crystal User Manual

Version: 6.6.0/2

241/459

13. Intercom

13.3.5

Defining the MF Keys

Next, name the control signals you wish to use as talkback buttons for each communications station. 

You may use any type of control signal. This includes console MF Keys, MF Keys on an external key panel,
VisTool screen buttons or external control signals.

In our example, we have a KSC-LCD14P2 panel for each of the 3 studios.

1.

Add the key panels to the 

Frames 

-> 

Panels

 configuration: 

2.

Double-click to open the key panel parameters, and name each MF Key:

Name Line 1

 and 

2

 are only supported by key panels with self-labeling buttons.

Summary of Contents for crystal












































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for crystal

Keithley 8009 Instruction Manual preview
8009
Brand: Keithley Pages: 36
Rain-Flo Irrigation 1200 Operating Manual preview
1200
Brand: Rain-Flo Irrigation Pages: 16
DanMedical D-MAS HyperSat 2540 Instructions For Use Manual preview
D-MAS HyperSat 2540
Brand: DanMedical Pages: 103
Ocmis Irrigazione MR Instructions For Use Manual preview
MR
Brand: Ocmis Irrigazione Pages: 100
XM Fitness XM100 Manual preview
XM100
Brand: XM Fitness Pages: 10
Jackson DISHSTAR ADA-SEER Operation Manual preview
DISHSTAR ADA-SEER
Brand: Jackson Pages: 2
Kaiweets KM117B User Manual preview
KM117B
Brand: Kaiweets Pages: 6
Kaiweets VT200 User Manual preview
VT200
Brand: Kaiweets Pages: 6
SprotDog Pro hunter 2525 Operating Manual preview
Pro hunter 2525
Brand: SprotDog Pages: 28
Barikell MK8 90 Instructions For Use Manual preview
MK8 90
Brand: Barikell Pages: 32
Fast MT765 Challenger Installation-Parts preview
MT765 Challenger
Brand: Fast Pages: 31
Kongsberg EM 712 Installation Manual preview
EM 712
Brand: Kongsberg Pages: 188
Proactive 715-430 Instruction Manual preview
715-430
Brand: Proactive Pages: 14
sauter TVO 500N300 Instruction Manual preview
TVO 500N300
Brand: sauter Pages: 5
Trigano SWING Xplorer Assembly Instructions Manual preview
SWING Xplorer
Brand: Trigano Pages: 13
GYM form POWER BURN Instruction Manual preview
POWER BURN
Brand: GYM form Pages: 40
Nahita 631/3 Plus Manual preview
631/3 Plus
Brand: Nahita Pages: 31
Lettuce Grow GROW RINGS Assembly Manual preview
GROW RINGS
Brand: Lettuce Grow Pages: 8

Brands by name

Popular brands

Load more brands