crystal User Manual
Version: 6.6.0/2
154/459
9. Audio IO
9.3.9
Assigning Audio to the RAVENNA Inputs (Rx Streams)
The 32 stereo Rx streams come pre-labeled and connected to sources (by the ON-AIR Designer configuration).
So, to receive audio from the network, you will need to assign an incoming source to each pre-configured
stream.
Following a fresh installation, you will see that there is "no source" assigned to any of the Rx streams:
RAVENNA Web UI (Default Stream Setup)
1.
Click on a Rx stream (e.g. RAV In 1) and use the 'Stream Source' field to select an incoming stream.
RAVENNA Web UI (Rx Stream - select source)
Note that you will see the outgoing streams from your local device in addition to streams arriving from the rest of
the network.
All other settings should be left unchanged.
2.
Once you have chosen a stream, click on
Apply
- the Rx stream name on the Home page updates to
show the stream name in ().
If the source RAV In 1 is assigned to a fader strip, then it should now be receiving some audio.
