crystal User Manual
Version: 6.6.0/2
148/459
9. Audio IO
RAVENNA IO Parameters
Once the
Enable MADI over RAVENNA
option is turned on, you can edit the name and other parameters for
the 64 signals.
1
.
Use the
Madi 1 (RAVENNA intern) Input
and
Output
tabs to access the parameters.
Madi 1 (RAVENNA intern) Outputs
Madi 1 (RAVENNA intern) Inputs
Note that the MADI ports are numbered from right to left in the configuration. Therefore, MADI 4 and MADI 3
relate to the two external MADI ports (on a 2-port MADI card), while MADI 2 and MADI 1 are the spare internal
ports. MADI 1 is always reserved internally for RAVENNA.
Most of the parameters are handled in an identical manner to other signals. See MADI IO for details.
When defining the names, every input can generate a RAVENNA Destination label, and every output a
RAVENNA Source Label. The labels can be used to define a default source stream for a RAVENNA input or
group of inputs. To implement this feature, the
Name
field must use the format [GroupName]:[SignalName],
where each label field is a maximum of 8 characters. Every label must be unique within the system network.
Output Parameters
·
Name
- defines the signal name. Use the format [GroupName]:[SignalName] to generate a RAVENNA
Source Label.
·
Type
- defines the format of the output: mono, stereo, etc. This should match the
Stream Size
.
·
Matrix enable
- by turning
ON
the
Matrix Enable
option, the output can be controlled by a matrix.
·
Default Audio
- alternatively, if
Matrix Enable
is
OFF
, a permanent audio source can be assigned to
the output. Note that the
Default Audio
setting is ignored when
Matrix Enable
is
ON
.
·
Transparent
- select this checkbox to set the output to be “transparent”.
·
RAVENNA Stream Size
- defines the number of audio channels used by the stream. This should
match the audio output format (
Type
).
Input Parameters
·
Name
- defines the signal name. Use the format [GroupName]:[SignalName] to generate a RAVENNA
Destination Label.
·
Type
- defines the format of the input: mono, stereo, etc. This should match the
Stream Size
.
·
Matrix enable
- by turning
ON
the
Matrix Enable
option, the input can be controlled by a matrix.
·
Transparent
- select this checkbox to set the output to be “transparent”.
·
Default RAVENNA Source Label
(optional) - defines the stream you wish subscribe to by entering its
RAVENNA Source Label. This option can be used to permanently link the receiver to a stream. To use
this feature, you must follow the [GroupName]:[SignalName] labeling convention described above.